Vancouver, British Columbia--(Newsfile Corp. - May 23, 2017) - Iconic Minerals Ltd. ICM (OTC Pink: BVTEF) YQGB (the "Company" or "Iconic") is pleased to announce that it has completed shallow drilling of a lithium brine target at Bonnie Claire. Both brine and sediment samples were collected continuously to a total depth of 300 feet (91.4 m). The sediments drilled consisted primarily of fine-grained sand and silt with occasional clay layers. At 160 feet (49 m), located below a thick clay zone, high density brine was intersected and continued through to the bottom of the drill hole. The drill hole location can be seen on the drill hole location map on the Company's website.
Harris Exploration Drilling of San Diego, California was contracted to drill a 300 foot (91.4 m) deep Reverse Circulation (RC) vertical hole ("BC1701"). Located approximately 1.55 miles (2.5 km) south of hole BC1602 in the vicinity of a major fault, BC1701 tested for lithium brine at shallow depths. Equipped with baloon tires, the drill rig used has a minimal footprint and is ideally suited to the soft sediments of the dry lake bed at Bonnie Claire.
The drilling encountered olive green fine-grained sand and silt with occasional clay layers to 140 feet (43 m). At 140 feet the hole penetrated heavy clay for 20 feet (6.1 m). Below this dense brine was intersected in sands with high water flow. Brine of different densities continued to the bottom of the hole with minor clay beds in between. Areas of very high brine content created foam on exiting the drill hole. Continuous water/brine sampling was done on 20 foot (6 m) intervals along with sediment sampling. All samples have been transported securely to geochemical labs.
Sediment samples are being analyzed by ALS Chemex of Reno, Nevada and brine samples by Western Environmental Testing Laboratory (WETLAB) of Sparks, Nevada. Results are expected within a couple weeks.
The Bonnie Claire Lithium Property Characteristics:
Richard Kern, Certified Professional Geologist (#11494) and CEO of Iconic is the Qualified Person who has prepared and reviewed this press release in accordance with NI 43-101 reporting standards.
On behalf of the Board of Directors
SIGNED: "Richard Kern"
Richard Kern, President and CEO
Contact: Richard Kern (604) 336-8614
For further information on ICM, please visit our website at www.iconicmineralsltd.com. The Company's public documents may be accessed at www.sedar.com
Forward Statement: This news release includes certain forward-looking statements or information. All statements other than statements of historical fact included in this release are forward-looking statements that involve various risks and uncertainties. There can be no assurance that such statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such statements. Iconic expressly disclaims any intention or obligation to update or revise any forward-looking statements whether as a result of new information, future events or otherwise except as otherwise required by applicable securities legislation.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
© 2024 Benzinga.com. Benzinga does not provide investment advice. All rights reserved.
Trade confidently with insights and alerts from analyst ratings, free reports and breaking news that affects the stocks you care about.