Wilwood Disc Brakes introduces new floor mount triple pedal assembly
This floor mount pedal assembly has a brake / clutch / throttle triple pedal design.
Camarillo, CA (PRWEB) October 25, 2012
This floor mount pedal assembly has a brake / clutch / throttle triple pedal design. There are three individual fabricated steel pedals with non-slip pedal pads to control brake, clutch and throttle. Pedal assembly part number 340-12410 is for rear engine cars and part number 340-12411 is for front engine cars. Both units feature an aluminum frame with strong lightweight fabricated steel pedal arms. The frame and the pedal arms have a black e-coat finish for protection and an attractive appearance. Also included with the pedal assembly are mounting studs, clevises, and balance bar assembly that is designed to provide smooth and accurate settings of the brake pedal bias. The balance bar can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. The pedal assembly provides a 5.25 to 1 nominal ratio.
Pedal assembly part number 340-12410 requires the customer to do the final assembly of the throttle pedal to the main pedal assembly. Kit part number 340-12411 requires using the same procedure as part number 340-12410 with the additional step of installing the throttle linkage assembly, part number 340-12412 that is necessary for front engine vehicles.
For more information contact: Wilwood Engineering at (805) 388-1188 and request to speak with Erika Gordillo for marketing issues, or Andy Fritts for technical questions. Also, Wilwood's website is accessible or e-mail.
For a high resolution photo for printing, please click here.
For the original version on PRWeb visit: http://www.prweb.com/releases/prweb2012/10/prweb10048984.htmView Comments and Join the Discussion!