The OIF Starts Two New 100G Projects

The Optical Internetworking Forum (OIF) is starting two new 100G projects. The first addresses the interoperable processing of Optical Transport Network (OTN) streams over a packet switch fabric. The second project addresses the important issue of thermal management at the faceplate of an optical communication system given the trend towards ever increasing port density coupled with the increased power consumption necessary to support higher data rates.

The convergence towards OTN as the primary transport protocol and the predominance of packet traffic lead to a need to switch ODUk/ODUflex in a Packet Fabric environment. The “OTN over Packet Fabric Protocol” project aims to develop a common protocol for switching ODUk/ODUflex data and timing through a packet fabric to ensure interoperability among framer and fabric devices. By defining a packetized ODUk/ODUflex format, true convergence is enabled as both packet and Constant Bit Rate (CBR) OTN signals can be switched by a common fabric within an Optical Transport Platform (OTP).

“The industry is seeing a trend toward converged packet optical transport as transport network rates increase to 40G/100G,” said Dave Stauffer, of IBM and the OIF’s Physical & Link Layer Working Group chair. “This leads to a growing need for interoperability between devices processing OTN clients and a converged OTP. A converged OTP may also lead to a more cost-effective approach.”

The OIF’s Physical Layer User Group will develop a white paper elaborating on the need and solutions to improve thermal management at the faceplate that support the trend of increasing power densities. Continued use of existing thermal management techniques will lead to increased operating temperatures for optical devices impacting their reliability as well as narrowing the range of compatible optical technologies that can be employed. The “Thermal Management at the Face Plate” white paper will present ways to improve thermal management at the faceplate for use with some representative MSA pluggable optical modules.

“In the next two to four years, the industry is projecting that power densities may increase by 2-3 times,” said Steve Joiner of Finisar and OIF board member. “I’m encouraging our member companies to send their thermal experts to project meetings to expedite the development of this white paper.”

About the OIF

Launched in 1998, the OIF is the first industry group to unite representatives from data and optical networking disciplines, including many of the world's leading carriers, component manufacturers and system vendors. The OIF promotes the development and deployment of interoperable networking solutions and services through the creation of Implementation Agreements (IAs) for optical, interconnect, network processing, component and networking systems technologies. The OIF actively supports and extends the work of standards bodies and industry forums with the goal of promoting worldwide compatibility of optical internetworking products. Information on the OIF can be found at http://www.oiforum.com.